The Pulsation Series T7 was designed to feed chemical products on a timed schedule. Typical applications include the feed of biocides in open-air cooling towers. The feed cycle is initiated and controlled by the programmable timer. The Series T7 provides everything you need in one unique, compact package to create a simple and cost effective metering system for timed applications. A 7-day programmable timer controls the Series T7. The timer is programmable in 1-minute increments with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-day cycle. Other control features include a standby mode, continuous ‘ON’ mode and the ability to adjust the stroke length from 0 to 100%. Four distinct models are available, having pressure capabilities to 100 psi (7.0 bar) and flow capabilities to 30 gpd (4.7 lph), with a turndown ratio of 10:1. Metering performance is reproducible to within ± 3% of maximum capacity.
Over 25 years of excellence, PULSAtron pumps carry agency approvals of ETL, ETL Sanitation, CE and NSF 61 (PVDF material and PVC Degassing Head models).
- Complete timer control in one unique package
- Solid state 7 day electronic timer
- Isolated from earth ground
- Few moving parts and wall mountable
- Safe and easy priming with durable leak-free bleed valve assembly (standard)
General Specifications
Accessories:
BROCHURES
TECH SHEETS
PULSAtron Series T7 Tech Sheet
IOMS
OTHER DOCUMENTS
PULSAtron QR Codes
PULSAtron Parts ID
PULSAtron Quick Reference Guide
| FLOW 12 – 30 GPD (1.9 – 4.7 LPH) 0.50 – 1.25 GPH | PRESSURE 100 PSI (7 BAR) |